Facilities Overview
At our main facility, we have over 2400 square feet of floor space. In addition to our main facility we have about 1000 square feet that is split between two locations where most of the R&D is done. All three locations have electronic test equipment as well as mechanical equipment for performing the work that is required for a given task. The facilities are setup to perform all work that is required to turn out a proto-type from the conception to a workable unit, and in most cases, to do it inhouse. The facilities are also setup to do limited production at a reasonable cost.
| Assembley/Inventory Area: | 2,000 sq. ft. |
| Epoxy/Vaccum Facility: | 150 sq. ft. |
| Model Machine Shop: | 150 sq. ft. |
| Bulk Storage: | 150 sq. ft. |
| Remote Research & Development: | 650 sq. ft. |